Ensitep®
PET (Polyethylene Terephthalate)
View Typical Property Values

ENSITEP® is an unreinforced, semi-crystalline thermoplastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro- mechanical parts. Because ENSITEP® has no centerline porosity, the possibility of fluid absorption and leakage is virtually eliminated.

• Excellent wear resistance
• Low coefficient of friction
• Very good chemical resistance
• No centerline porosity eliminates the possibility of fluid absorption and leakage
• Good electrical insulator
• High mechanical strength
• Excellent hardness and stiffness
• In compliance with FDA regulations CFR 177.1630 for use in contact with food
• Low water absorption
• Good resistance to high-energy radiation

ENSITEP®s superior wear resistance and lack of centerline porosity give it an advantage over other materials for applications involving solvents, chemicals, and food products. ENSITEP® is also used in water purification systems, printing equipment, textile components, food-handling equipment, and valves.

This information is only to assist and advise you on current technical knowledge and is given without obligation or liability. All trade and patent rights should be observed. All rights reserved. Data obtained from extruded shapes material.

MATERIAL AVAILABILITY
Rods: Diameters: 3/16" to 4 3/4" diameter, 10' length Length: 5" and greater diameter, 5' length
Primary Speciafications (Resin) (Typical)
ASTM-D-5927 TPES0211 Plates: 1/4" to 4" thickness inclusive are 2' x 4'
Shape Specification (Typical) ASTM-D-6261 S-TPES0211

Profiles, tubes, and special sizes are custom-produced on request.